In Part 3: The Patient, Chapter 7: Zoe The Patient in Silent Hill: Townfall, you will need to administer a treatment to the patient. This article will guide you on how to administer the treatment, including the steps you need to follow to give the correct dose of medicine.

How to Administer the Treatment to the Patient

After completing the X-ray, return to the surgery room. The doctor will ask you to use the infusion pumps to administer the treatment. There are three infusion pumps connected to the patient. You need to place one medicine in each pump. The order does not matter, so you can place the medicines in any of the three pumps.

First, check the patient’s weight on the whiteboard. The patient weighs 88 kg.

Next, use the laptop you used earlier for the X-ray settings. Open the medication dosage table and find the dosage for a patient weighing 81 to 90 kg.

For an 88 kg patient, set the infusion rates as follows:

Place Tensobromide 11mg in a pump and set the rate to 8. Make sure the pumps show that they are ready.

Place Dextracyclate 2.5mg in another pump and set the rate to 15. Make sure the pumps show that they are ready.

Place Hydroxalene 3mg in the remaining pump and set the rate to 7. Make sure the pumps show that they are ready.

Once all three infusion pumps are set correctly, look for the small square device to the left of the patient’s head. Interact with it and press the Ready button to administer the treatment