Chamber of Detachment Walkthrough
This guide shows how to get all 6 collectibles by completing the puzzles in Chamber of Detachment in the Star Wars Jedi: Survivor game, released on 28th April 2023. The Chamber of Detachment is in Mountain Ascent at the location shown in the pictures below. From the meditation point, dash through the green barrier. Then jump down to the surface below and go behind the waterfall to reach the Chamber of Detachment.
1) Databank
The first databank is right in the front as you end the chamber.
2) Databank
Proceed to the main area and you will find the next Databank in the right corner as shown in the picture below.
3) Databank
The third Databank is on the other edge of the same wall as the previous databank as shown in the picture below.
4) Treasure
Near the previous databank, you will find a giant block (Block 1 in the picture below). Pull it out.
Behind Block 1, you will find an orb. Grab it and place it into the socket behind a spinning opening as shown in the picture below. This will make the flame shoot out on the opposite wall.
Use Koboh Grinder to throw Koboh Matter into the flame and extend the flame up to the Koboh Matter on the upper side of the left wall as shown in the pictures below. The Datadisc is stuck in that Koboh Matter. When it will burn, the Datadisc will fall down and you can collect it from the ground.
5) Chest
When you pulled Block 1 previously, it went to the opposite wall. There is Koboh Matter on this wall as well. Throw Koboh Matter on Block 1 and connect it with the Koboh Matter on the wall as shown in the picture below.
Now pull Block 1 such that the Koboh Matter on it burns from the flame. Now quickly push it back. The flame on Block 1 will burn the Koboh Matter on the wall as shown in the second picture below.
Now pull out Block 1, revealing Block 2 behind the burned Koboh Matter as shown in the picture below. Pull out Block 2 as well and you will find a chest behind it. Open it to get Jedi Paint.
6) Perk (Patience)
If you did everything as mentioned in this guide, then Block 1 & Block 2 will be on the opposite wall as shown in the picture below.
Pull out Block 2 and then quickly pull out Block 1 as well. When Block 2 crosses the pressure plate as shown in the picture below, quickly pull it back. This will make Block 1 and Block 2 connect together, with Block 2 on top of the pressure plate as shown in the second picture below. With the pressure plate pressed, the panel on the opposite wall will come down.
Now pull Block 1. It will go and stop over the moving panel as shown in the picture below. Then move Block 2 towards Block 1. As Block 2 will leave the pressure plate, the panel will start moving up, taking Block 1 with it. Now quickly jump and climb up Block 2. When Block 2 approaches the wall, climb up Block 1 as shown in the second picture below. Now proceed ahead and collect the perk to complete the chamber.
