Chapter 3: Course Correction Walkthrough | Dead Space Remake

Chapter 3: Course Correction

This guide shows how to complete Chapter 3: Course Correction in Dead Space Remake. The guide only shows the main mission objectives and does not include the collectibles. Please note that you will be able to access some areas only from the story progression. So, if you are unable to open some doors then don’t fret as you will be able to access those areas later.

Also Read: Dead Space Remake Walkthrough & Collectibles


Reach the Engineering Deck

As the mission starts keep going straight on the hangar bay. Your path will be blocked, so you will need to use your thrusters to fly across. On the right side, you will find an entrance as shown in the picture below. Go inside and jump down using the thrusters. Reach the lowest level, where you will find the door leading to the Engineering Bay as shown in the second picture below. Go inside and continue on the straight path to reach the destination.


Activate the Control Console

Interact with the console in the Engineering Deck to complete the objective.


Refuel the Engines (South)

Enter the Preparation Room and from there go to the Machine Shop. Go down the stairs and you will find the Ripper gun. From there go towards the Refueling Control Station. Continue ahead and you will see a Cable car as shown in the picture below. Use Kinesis to pull the cart towards you. Then use it to reach the other side.

Step out of the Cable Car and climb up the ramp straight ahead. Then turn left and climb another ramp. As you continue on this path, you will find a save station. On the right side of the save station, you will find a Fuel Station Keycard. Pick it up.

Go back down the ramp and use the Keycard to enter the Fuel Management room as shown in the picture below. Use the circuit breaker inside to power the South Refuel Station as shown in the second picture below.

Now go back to the save station and climb down the stairs next to it. This will take you to the South Refuel Station. Use Kinesis to pull down the lever there as shown in the picture below to Refuel the South Engine.


Refuel the Engines (North)

Go back to the cable car and use it to reach the other side. Step out of the cable car and climb up the ramp on the right side to reach the North Refuel Station. Use Kinesis to pull down the lever on the Refuel Station to Refuel the engine.


Activate the Centrifuge

After you get the objective, head to the control room. You will find the door to be locked. Shoot the tube next to the door to unlock it and then go inside. Now make your way to the centrifuge as shown in the picture. The path to reach the centrifuge is pretty straightforward. Simply use your locator and it will guide you to the location.

Once you are in the centrifuge, you will see two generator modules as shown in the picture below. You will have to insert these two generator modules into the clutches in front of them. Make sure you recharge your Statis before proceeding ahead.

Now, use your thrusters to fly toward a generator module. When you are near a generator module, use Statis on it to slow it down. Then use Kinesis to move it towards the clutch in its front and insert it into the clutch as shown in the pictures below.

When both the generator modules are inside the clutches, go to the platform on the top and use the console there to restart the centrifuge as shown in the picture below. This will complete the objective.


Manually Ignite the Engines

As the objective starts, turn around and enter the elevator in front of the console that you used to start the centrifuge. Take the elevator down. Step out of the elevator and walk on the platform in a clockwise direction. Here you have to be cautious of the rotating blades on the centrifuge. When a blade approaches you, hide in the alcoves in the wall as shown in the picture below. In the third alcove, you will find an elevator. Take it to reach the upper level.

Step out of the elevator and go through the door on the right side. Here you will be attacked by a giant tentacle. Shoot on the boils on the tentacle as shown in the picture below to get rid of it.

Now head back to the control room. Use the locator and it will guide you to it. After reaching the control room, go through the door on the right side of the save station. This will take you to a room with two giant fans. The door there leading to the engine room won’t have any power. Use Statis to slow down the giant fan on the left side as shown in the picture below. Then use your thrusters to fly between the blades and reach the area behind the fan. There you will find a circuit breaker. Use it to power the Airlock 2. This will power the door. Now again use Statis on the giant fan and fly back to the main platform and go through the door.

As you proceed, you will find another tentacle blocking the path. Shoot the boils to clear the path. In the next area, you will find the Flamethrower weapon. after that squeeze through the narrow passage to reach the next room. Take the elevator there going down. Clear your path by shooting the boils then take another elevator going down. In this area, you will see a malfunctioning door as shown in the picture below. Use Statis to slow down the door and proceed ahead. If your Statis is not charged, then you can recharge it in the station inside a small room in this area.

Proceed in a linear path to reach the engine room. There you will hear a warning about the engine power failure and that you need to replace the cell. To bring back the power, you will need to insert a battery into the socket in the Power Substation 03 as shown in the picture below. Climb up the ramp in front of Power Substation 03 to find the power cell as shown in the second picture below. Use Kinesis to lift the power cell and then take it to the socket and insert it inside to bring back the power.

Defeat the enemies and go to the console on the platform above as shown in the picture below. When the engines are ready, confirm ignition on the console. This will complete the objective.


Return to the Tram Station

Use your locator to reach the Control Room and from there, make your way to the Engineering Tram Station. This will complete the mission.

This Post Has One Comment

Leave a Reply