Kiln Repair at the Kilnden Workshop is the 48th main mission in Crimson Desert. In this mission, you will assist with restoring the workshop by activating an ancient generator and repairing damaged kiln equipment. This walkthrough will guide you step by step through each objective to restore the kiln in the game.
Activate the ancient generator
As the quest starts, your main task is to activate the ancient generator tower. To do this, you need to match glowing symbols in the same line on the tower. The tower has rings that can rotate. Each ring has symbols on it.
You must line up 4 matching glowing symbols in the same vertical line.
- The bottom and top symbols are already correct.
- Players only need to fix the two symbols in the middle rings.
In front of the tower, you will see a yellow glowing switch/lever. Use this switch to choose which ring you want to move. After selecting a ring, use the wooden lever to rotate that ring. Keep rotating it until the glowing symbol in that ring matches the others (top/bottom) symbols. Do this for both middle rings. Once all the symbols match, the generator will turn on.
- Move the yellow lever to the middle to select the third ring, then use the wooden lever to rotate the ring until the third symbol lines up with the first two.
- Move the yellow lever all the way right to select the second ring, then use the wooden lever to rotate the ring until the second glowing symbol lines up with the first.
Fix the disconnected kiln
The disconnected kiln is located southeast of the ancient generator. Head toward this area and move behind the kiln. Here, you will find a loose and broken cable lying near the back. Approach the cable and interact with it to reconnect the wires.
Once the cable is properly joined, interact with the Yellow wooden lever and push it to power up the kiln.
Fix the dismantled kiln
Dismantled Kiln is located south of the Ancient Generator. To fix the dismantled kiln, you need to place the broken pieces back onto the Kiln.
Use Axiom Force to lift each broken part and carefully set it on top of the kiln. Once it is in position, climb up on top of the structure and jump. Then use the Force Palm while in the air to secure it in place. There are two broken pieces, so repeat the same steps for each one to fully repair the kiln.
Put fuel into the kiln
To fuel the kiln head north from the ancient generator, where you need to put 5 blue glowing balls as fuels into the round openings around the kiln. When all 5 glowing balls are inserted, push the wooden lever around the kiln to power it on.
Blue Ball 1 & 2
You can find both of these right next to the kiln.
Blue Ball 3
Go to the left side of the kiln. Here, you will find a bird-shaped statue with a glowing blue head. The Blue Ball is actually embedded in the statue’s eye. Pull the ball from the eye.
Blue Ball 4
This one is also near the kiln. Check the ground between the kiln and the bird-shaped statue. It is lying out in the open.
Blue Ball 5
Head south from the kiln and cross over to the opposite side of the water. There, look for a small, dark cave entrance tucked into the rock. The Blue Ball can be found just inside this cave.
