How to Fix the Comms Array

This guide shows how to complete the Fix the Comms Array objective in Chapter 8: Search and Rescue in Dead Space Remake. Please note that you will be able to access some areas only from the story progression. So, if you are unable to open some doors then don’t fret as you will be able to access those areas later.

Also Read: Dead Space Remake Walkthrough & Collectibles

The objective starts as you reach the Bridge Tram Station during Mission 8. From the Bridge Tram Station, make your way to the Main Atrium. Once you reach there, defeat the enemies and then enter the elevator going to Comms Array. Go to Floor 3 as shown in the picture below. Step out of the elevator and make your way to the Comms Access Hall. Then enter the Comms Control room. From there go through the door on the right. Then turn left and go out to the Communications Array.

Your objective here is to reroute the power to the top by completing the circuit. To do that, you need to replace the fried/ incorrect dishes with the correct ones. The completed circuit is shown in the picture below. To complete the circuit, place the correct dishes at the nodes marked with yellow squares in the picture below. The second picture below shows the completed circuit as displayed on the Communication Control panel.