Replace the Damaged Tram | Dead Space Remake

Replace the Damaged Tram

This guide shows how to complete the Replace the Damaged Tram objective in Chapter 1: New Arrivals in Dead Space Remake. Please note that you will be able to access some areas only from the story progression. So, if you are unable to open some doors then don’t fret as you will be able to access those areas later.

Also Read: Dead Space Remake Walkthrough & Collectibles

This objective starts as you enter the Tram Control Room. Use the locator (‘X’ on PC) to know the path you need to take. Go to the Tram Tunnel. Here you will find a Statis Module. Pick it up and use it on the malfunctioning door leading to the Tram Station Hall as shown in the picture below. This will slow down the door and you can proceed ahead. Proceed ahead until you reach the Save Station. From there, enter the Tram Repair Room on the left side.

Inside the Tram Repair Room, interact with the console at the center to open the shutters as shown in the picture below.

Then go to the console on the left side and interact with it. This will make a claw come out and hold the tram.

Now go to the console on the other side of the room and interact with it. You will notice that this claw is unable to hold onto the tram. To make this claw work, use Statis on it when it approaches the tram as shown in the picture below.

When both the claws are activated, quickly go to the central console as shown in the picture below, and initiate claw engagement to replace the damaged tram. This will complete the objective.

Leave a Reply