Activate the Centrifuge (Chapter 3) | Dead Space Remake

How to Activate the Centrifuge

This guide shows how to complete the Activate the Centrifuge objective in Chapter 3: Course Correction in Dead Space Remake. Please note that you will be able to access some areas only from the story progression. So, if you are unable to open some doors then don’t fret as you will be able to access those areas later.

Also Read: Dead Space Remake Walkthrough & Collectibles

After you get the objective, make your way to the centrifuge as shown in the picture. The path to reach the centrifuge is pretty straightforward. Simply use your locator and it will guide you to the location.

Once you are in the centrifuge, you will see two generator modules as shown in the picture below. You will have to insert these two generator modules into the clutches in front of them. Make sure you recharge your Statis before proceeding ahead.

Now, use your thrusters to fly toward a generator module. When you are near a generator module, use Statis on it to slow it down. Then use Kinesis to move it towards the clutch in its front and insert it into the clutch as shown in the pictures below.

When both the generator modules are inside the clutches, go to the platform on the top and use the console there to restart the centrifuge as shown in the picture below. This will complete the objective.

Leave a Reply