Re-Position the Marker (Chapter 11) | Dead Space Remake

How to Re-Position the Marker

This guide shows how to complete the Re-Position the Marker objective in Chapter 11: Alternate Solutions in Dead Space Remake. Please note that you will be able to access some areas only from the story progression. So, if you are unable to open some doors then don’t fret as you will be able to access those areas later.

Also Read: Dead Space Remake Walkthrough & Collectibles

As the mission starts, leave Hangar Bay and enter Flight Deck Runway #2. Then go through the door on the left side and enter the Gravity Control area of the Main Hangar Bay as shown in the picture below. Use the console to deactivate gravity.

Fly straight ahead and enter the room on the right side as shown in the picture below. Interact with the console in the room to activate the loader. Then pick up the power cell in the room. Insert this power cell into the socket near the Circuit Breaker outside as shown in the second picture below. Then use the circuit Breaker to switch on Cargo Rail Tracks.

Now climb up the platform behind the circuit breaker. Use the Track Control console near the marker to switch tracks. This will rotate the marker and make it move as shown in the picture below. Then use the next console to change track and move it further ahead. Now go to the next console and use it to change track and move it further ahead, Use the third console again so that it reaches its destination as shown in the second picture below. This completes the objective.

This Post Has One Comment

Leave a Reply